Installation method of fiber reinforced PE pipe

Fiber reinforced PE pipes can withstand the characteristics of most industrial chemicals. In fact, this product has a certain degree of flexibility compared to ordinary steel pipes, and the construction is also very simple, without the need for anti-corrosion treatment, saving a lot of processes. Below we will explain the installation method of fiber-reinforced PE pipes.

When installing fiber-reinforced PE pipes, construction technicians should carefully familiarize themselves with the drawings, understand the design intent, and promptly contact the owner, supervisor, and design personnel if any problems are found in the drawings. They should jointly review the drawings and keep records of the joint review. Familiar with the general performance of fiber-reinforced PE pipes and master the necessary operating points. And before connecting, it is necessary to conduct a correct inspection of the fittings, pipelines, and ancillary equipment according to the design requirements, and conduct a visual inspection on the construction site to see if they meet the requirements before they can be used. The main items to be checked during the inspection of fiber-reinforced PE pipes are the external surface quality, pressure resistance level, compatibility quality, and material consistency. Of course, it is also recommended to use welded pipes and use fittings and pipes of the same brand. Special heating tools must be used according to different interface forms, and open flames cannot be used to heat pipes and fittings. If you have any questions, you can call us at any time to inquire. You can access our official website and see our contact information. You can also consult our online customer service personnel. We will help everyone solve some problems with quotation methods.

Fiber reinforced PE pipes should be left at the construction site for a certain period of time before connection, so that the temperature of the fittings and pipes is consistent. Especially when connecting, the pipe end must be kept clean, and the nozzle must be temporarily blocked after each operation to prevent debris from entering the pipeline and affecting its use. In addition, there are some important aspects that require certain protective measures or adjustment of the connection process when connecting in cold weather (below 5 degrees Celsius) and strong wind conditions. Protect the nozzle from wind, rain, and sand to prevent damage to the pipeline. After the fiber reinforced PE pipe is correctly connected, a careful visual inspection should be carried out. If there are any unqualified situations, rework should be carried out immediately. Especially its end face should be perpendicular to the axis of the pipe. Fiber reinforced PE pipes should be complete, defect free, and deformation free. Of course, it is also not advisable to expose it to sunlight for a long time. To avoid bending of pipes during storage and transportation, they should be stacked flat. When handling pipes and fittings, care should be taken to avoid oil contamination. Violent impact, sharp contact, throwing, falling, and dragging are strictly prohibited. Especially when there is a significant temperature difference between the construction site and the material storage area, pipe fittings and pipelines should be left on site for a certain period of time before installation, so that the temperature is close to the ambient temperature on site.